UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 1113
An existing call can be transferred into a conference call.
Meet Me Paging Transfer allows the user to page a co-worker and have the call
automatically transferred when the co-worker answers the page.
When transferring, an extension user can press a One-Touch key instead of dialing the
extension number.
Serial calls allow for transferring a call so it automatically returns to the transferring extension
when completed.
When a multiline terminal user is on a call, they can transfer to another station by pressing a
DSS key for that station. It is not necessary to press Transfer to transfer to another station
with a DSS key.
When a multiline terminal user is on a call, they must press transfer to transfer a call off site with a DSS
key.
The following features require certain tones be changed in Program 80-01-02. Refer to the
table in the VM8000 InMail feature programming section for settings:
Call Holding
Busy Greeting
Call Screening
Await Answer Transfer
A Trunk-to-Trunk transfer can be established by the following operation:
1. While talking to an outside party, press Hold.
2. Access a second outside line and dial the desired number.
3. Press Transfer to complete the Trunk-to-Trunk transfer.
When the second call is to be transferred to another station (Not Trunk-to-Trunk), the user should press
Hold at step 3, then dial the desired station and press Transfer to complete the transfer.
If station A calls Station B, and station A puts station B on hold and then calls station C,
station C cannot transfer the call.
Default Setting
Enabled
To Next Page
Loading...
