NEC Univerge SV8100 - Page 1152

Issue 1.0 UNIVERGE SV8100
2 - 1128 Trunk Group Routing
Operation
To place a call using Trunk Group Routing:
1. At the multiline terminal, press Speaker.
- OR -
At single line telephone, lift the handset.
2. Dial 9.
3. Dial number.
- OR -
1. At the multiline terminal, press Trunk Group Routing key (Program 15-07 or SC 752: 05).
 Also refer to the Call Appearance (CAP) Keys on page 2-125.
2. Dial the number.