NEC Univerge SV8100 - Page 1214

Issue 1.0 UNIVERGE SV8100
2 - 1190 Uniform Numbering Network
44-05-05 ARS/F-Route Table – Gain Table
Number for Internal Calls
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Select the gain table number
to be used for internal calls
(0~500).
0~500
0 = No Setting
(default = 0)
3
44-05-06 ARS/F-Route Table – Gain Table
Number for Tandem Connections
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Select the gain table number
to be used for the tandem call
(defined in Program 44-07).
0~500
0 = No Setting
(default = 0)
3
44-05-07 ARS/F-Route Table – ARS Class
of Service
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Select the Class of Service
to be used for ARS (0~16). An
extensions ARS COS is determined
in Program 26-04-01.
0~16
(default = 0)
3
44-05-08 ARS/F-Route Table – Dial
Treatment
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Select the Dial Treatment to
be used (0~15). The Dial
Treatments are determined in
Program 26-03-01.
0~15
(default = 0)
3
44-05-09 ARS/F-Route Table – Maximum
Digit
Input the maximum number of
digits to send when using the
F-Route.
0~24
(default = 0)
3
44-05-10 ARS/F-Route Table – CCIS over IP
Destination Point Code
For each ARS/F-Route table
(1~500) assign the priority (1~4).
Set the CCIS over IP Destination
Point Code (0~24).
0~16367
(default = 0)
3
44-05-11 ARS/F-Route Table – Network
Specified Parameter Table
For each ARS/F-Route table
(1~500) assign the priority (1~4).
Assign the Network Specified
Parameter Table (0~16).
0~16
(default = 0)
3
44-06-01 Additional Dial Table If an Additional Dial Number Table
is entered in Program 44-05-03,
define the additional dial table
(1~1000) to add digits in front of the
dialed ARS/F-Route number (24
digits maximum 1-9, 0 
#, Pause).
To enter a wild card/don’t care digit,
press Line Key 1 to enter a P
(pause) symbol.
Up to 24 digits
Enter: 1~9, 0, , #,
Pause (press line key 1
to enter a pause)
(default = Not assigned)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3