NEC Univerge SV8100 - Page 1233

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 1209
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
11-04-01 Virtual Extension Numbering Assign Extension Number for the
Virtual Extensions (1~256).
Up to eight digits
1 201
2 202
3 203
~ ~
99 299
100 3601
~ ~
256 3757
3
15-01-01 Basic Extension Data Setup –
Extension Name
Define the extension/virtual
extension name.
Up to 12 characters
Default:
STA 101 = Ext 101
STA 102 = Ext 102, etc.
3
15-02-21 Multiline Telephone Basic Data
Setup – Virtual Extension Access
Mode (when idle Virtual
Extension key pressed)
Determine whether an extension
Virtual Extension Key should be
used as a DSS key to the extension
and for receiving calls (0),
answering incoming calls and
ability to place outgoing ICM or CO
calls (1), or just receiving incoming
calls (2). If the key is to be used for
outgoing calls, the extension
number of the key must be a real
extension or virtual extension
number. When the extension
number of the key is a real
extension number, when the key is
pressed, the real extension cannot
be used.
Virtual Extension Key
Mode
0 = DSS
1 = OTG (Outgoing)
2 = Ignore
(default = 2)
3
15-02-30 Multiline Telephone Basic Data
Setup – Toll Restriction Class
Assign if the phone uses the Toll
Restriction class of the VE (0) or
the Real Extension when making
outbound calls from the VE.
0 = Vir. Ext. (Virtual
Extension Class)
1 = Real Ext. (Real
Extension Class)
(default = 1)
3
15-07-01 Programmable Function Keys Assign Virtual Extension function
keys on Multiline telephones (code
03 + extension number).
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

00 ~

99 (Appearance
Function Code) (Service
Code 752 by default)
3
15-08-01 Incoming Virtual Extension Ring
Tone Setup
When an extension or a virtual
extension is assigned to the
function key on the key telephone,
select the ring tone when receiving
a call on that key.
For ACD CAR keys, only tone
pattern 1 (entry 0) can be used.
The remaining patterns are not
checked with this feature.
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming Ring Tone
Extension
(default = 0)
3