Issue 1.0 UNIVERGE SV8100
2 - 1274 Voice Mail Message Indication on Line Keys
Related Features
Class of Service
Direct Station Selection (DSS) Console
Programmable Function Keys
UM8000 Mail
VM8000 InMail
Voice Mail Integration (Analog)
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
15-07-01 Programmable Function Keys Assign DSS/BLF function keys on
Multiline telephones (code 01 +
extension number) or Message Key
(Code 77 + mailbox number).
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~
99 (Appearance
Function Code) (Service
Code 752 by default)
3
20-13-41 Class of Service Options
(Supplementary Service) – Voice
Mail Message Indication on DSS
Turns Off (0) or On (1) the Voice Mail
Message Indication for an extension
on a DSS console.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
30-01-01 DSS Console Operating Mode Set the mode of the system DSS
Consoles. The available options are
Regular (Business) Mode (0), Hotel
Mode (1), ACD Monitor Mode (2) or
Business/ACD Mode (3).
0 = Business Mode
1 = Hotel Mode
2 = ACD Monitor Mode
3 = Business/ACD Mode
(default = 0)
3
30-02-01 DSS Console Extension
Assignment – Extension Number
The extension number for the
multiline terminal connected with the
DSS console (up to eight digits).
Up to eight digits.
(default not assigned)
3
To Next Page
Loading...
