UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 1279
Related Features
Conference
Off-Hook Signaling
Programmable Function Keys
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
11-12-41 Service Code Setup (for System
Access) – Voice Over
The service code used for the Voice
Over feature (default: 690).
To use Service Code 690 for
Voice Over, Program 11-16-08
(Single Digit Service Code
Setup – Voice Over) must be
undefined.
MLT
(default = 690)
3
11-16-08 Single Digit Service Code Setup –
Voice Over
Service code used for the Voice
Over feature (default: 6).
(default = 6)
3
15-07-01 Programmable Function Keys Assign a function key for Voice
Over (code 48).
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~
99 (Appearance
Function Code) (Service
Code 752 by default)
3
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) to
an extension.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
3
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
Allows a busy extension to
Manually (0) or Automatically (1)
receive off-hook signals.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
To Next Page
Loading...
