NEC Univerge SV8100 - Page 135

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 111
Operation
To place a call using ARS:
1. At the multiline terminal, press Speaker.
- OR -
At the single line telephone, lift the handset.
 You hear normal Intercom dial tone.
2. Dial 9.
 You hear a second, “stutter” dial tone.
3. Dial the outside number.
 If you hear another “stutter” dial tone, you must enter your extension ARS Authorization Code.
80-03-06 DTMF Tone Receiver Setup –
Backwards Twist Level
Use this option to define the
backwards twist level for DTMF Tone
Receiver.
0~9
(1dB ~ 10dB)
default:
All Receivers = 9
3
80-03-07 DTMF Tone Receiver Setup – ON
Detect Time
Use this option to define the On
detection time for DTMF Tone
Receiver.
1~255
(15+ 15 ms ~ 3825 ms)
default:
All Receivers = 1
3
80-03-08 DTMF Tone Receiver Setup – OFF
Detect Time
Use this option to define the Off
detection time for DTMF Tone
Receiver.
1~255
(15+ 15 ms ~ 3825 ms)
default:
All Receivers = 1
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3