Issue 1.0 UNIVERGE SV8100
3 - 16 Codes Tables
Central Office Calls,
Placing
#9 + 001~200 Placing a call over a specific trunk 01 + trunk
(100-200)
645 + trunk # + 1 (block)
145 + trunk # + 0 (enable)
To block/busy out outbound usage on
a trunk with Trunk Port Disable.
-
704 + trunk group (1~9 or
001~200)
Placing an outside call over a trunk
group
02 + group
Class of Service 677 Changing the COS of another
extension. Must be allowed in
Program 20-13-28.
-
Conference Hookflash + #1 + extension
+ hookflash twice
Activating Conference from a Single
Line (500/2500) set
1016
Data Communications 783 Enabling the data connection auto-
answer mode
-
784 Disconnecting an active data call -
Department Calling 650 + 0 (install) or
1 (remove)
Logging in (0) or logging out (1) for
your Department Calling Group
46
Department Step
Calling
# Step Calling through a Department
Group
36
Dial Pad Confirmation
Tone
724 Enabling/disabling Dial Pad
Confirmation Tone
-
Directed Call Pickup
+ ext. Picking up a call ringing or waiting at
an extension
-
Do Not Disturb 747 +
0 (Cancel)
1 (Trk calls)
2 (Paging, ICM, Call
Forwards, and Transfers)
3 (All calls)
4 (Call Forwards)
Activating Do Not Disturb -
Door Box 702 + Door Box (1~4 or
1~8)
Placing a call to a door Box -
722 A Door Box is forwarded off-premise -
E911 786 Turning off the E911 alarm
(US Only)
-
Flash #3 Flashing a trunk from a single line
telephone
-
For this feature... Dial this Service Code...
1
When you are...
Also see
Function
Key...
1
Except where indicated, dial Service Code from intercom dial tone (e.g., press idle Speaker first).
To Next Page
Loading...
