NEC Univerge SV8100 - Page 176

Issue 1.0 UNIVERGE SV8100
2 - 152 Call Forwarding
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
 Level 1 – these are the most commonly assigned programs for this feature.
 Level 2 – these are the next most commonly assigned programs for this feature.
 Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
11-10-06 Service Code Setup (for System
Administrator) – Setting the
Automatic Transfer for Each
Trunk Line
Set the service code for setting
automatic transfer for each trunk
line.
MLT
(default = 733)
3
11-10-07 Service Code Setup (for System
Administrator) – Canceling the
Automatic Transfer for Each
Trunk Line
Set the service code for canceling
automatic transfer for each trunk
line.
MLT
(default = 734)
3
11-10-08 Service Code Setup (for System
Administrator) – Setting the
Destination for Automatic Trunk
Transfer
Set the service code for setting the
destination for automatic trunk
transfer.
MLT
(default = 735)
3
11-10-18 Service Code Setup (for System
Administrator) – Off-Premise
Call Forward by Door Box
Set the service code for setting
automatic transfer for each trunk
line.
MLT
(default = 722)
3
11-11-01 Service Code Setup (for Setup/
Entry Operation) – Call Forward
– All
Set the service code for setting call
forwarding all calls.
MLT, SLT
(default = 741)
3
11-11-02 Service Code Setup (for Setup/
Entry Operation) – Call Forward
– Busy
Set the service code for setting call
forwarding for busy calls.
MLT, SLT
(default = 742)
3
11-11-03 Service Code Setup (for Setup/
Entry Operation) – Call Forward
– No Answer
Set the service code for setting call
forwarding for no answer.
MLT, SLT
(default = 743)
3
11-11-04 Service Code Setup (for Setup/
Entry Operation) – Call Forward
– Busy/No Answer
Set the service code for setting call
forwarding for busy or no answer.
MLT, SLT
(default = 744)
3
11-11-05 Service Code Setup (for Setup/
Entry Operation) – Call Forward
– Both Ring
Set the service code for setting call
forwarding for busy or no answer.
MLT, SLT
(default = 745)
3
11-11-07 Service Code Setup (for Setup/
Entry Operation) – Call
Forwarding – Follow Me
Set the service code for setting call
forwarding for follow me.
MLT, SLT
(default = 746)
3
11-11-08 Service Code Setup (for Setup/
Entry Operation) – Do Not
Disturb
Set the service code for setting call
forwarding for Do Not Disturb.
MLT, SLT
(default = 747)
3