NEC Univerge SV8100 - Page 178

Issue 1.0 UNIVERGE SV8100
2 - 154 Call Forwarding
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) to
extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
3
20-09-01 Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DIL/
E&M Override
Turns Off (0) or On (1) the
extension ability to receive a
second call from a DID, DISA, DIL,
or tie line caller.
 With this option set to 1, the
destination extension must be
busy for a second DNIS caller
to ring through. If the
destination extension does not
have a trunk or CAP key
available for the second call
and a previous call is ringing
the extension but has not yet
been answered, the second
caller hears busy regardless of
this program setting.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
Turns Off (0) or On (1) an extension
ability to have calls queued if a call
rings the extension when it is busy.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-11-01 Class of Service Options (Hold/
Transfer Service) – Call Forward
All
In an extension Class of Service,
turns On (1) or Off (0) the ability of
an extension user to set Call
Forward Immediate.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-11-02 Class of Service Options (Hold/
Transfer Service) – Call Forward
When Busy
In an extension Class of Service,
turns On (1) or Off (0) the ability of
an extension user to set Call
Forwarding when Busy.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-11-03 Class of Service Options (Hold/
Transfer Service) – Call
Forwarding When Unanswered
In an extension Class of Service,
turns On (1) or Off (0) the ability of
an extension user to set Call
Forwarding when Unanswered.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-11-04 Class of Service Options (Hold/
Transfer Service) – Call
Forwarding (Both Ringing)
In an extension Class of Service,
turns On (1) or Off (0) the ability of
an extension user to set Call
Forwarding with Both Ringing.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-11-05 Class of Service Options (Hold/
Transfer Service) – Call
Forwarding with Follow Me
In an extension Class of Service,
turns On (1) or Off (0) an extensions
ability to set Call Forward with
Follow Me.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3