NEC Univerge SV8100 - Page 182

Issue 1.0 UNIVERGE SV8100
2 - 158 Call Forwarding
3. Dial 1 (Set).
4. Dial the station number to be forwarded and then the destination number.
5. Press Speaker or hang up.
 The Call Forwarding Programmable Function Key goes on.
To cancel Call Forward – Follow Me from the destination station:
1. Pick up the handset or press Speaker.
2. Dial the Call Forward – Follow Me Service Code (default: 746).
- OR -
At the multiline terminal only, press the Call Forwarding Programmable Function keys.
(Program 15-07-01, 10 or SC 751, Key Code 15)
3. Dial 0 (Cancel).
4. Dial the station number, which is forwarded, or 0 to cancel all extensions.
5. Press Speaker or hang up.
 The Call Forwarding Programmable Function Key turns off.
To set Call Forward Immediate for any Extension to Destination:
1. Pick up the handset or press Speaker.
2. Dial the Call Forward Immediate for any Extension to Destination Service Code (Default: 790).
3. Dial 1 (Set).
4. Dial the extension number to be forwarded and then the destination number.
5. Press Speaker or hang up.
To cancel Call Forward Immediate for any Extension:
1. Pick up the handset or press Speaker.
2. Dial the Call Forward Immediate for any Extension to Destination Service Code (default: 790).
3. Dial 0 (Cancel).
4. Dial the station number which is forwarded.
5. Press Speaker or hang up.
To set Call Forward Busy/No Answer for any Extension to Destination:
1. Pick up the handset or press Speaker.
2. Dial the Call Forward Busy/No Answer for any Extension to Destination Service Code (default: 793).
3. Dial 1 (Set).