Issue 1.0 UNIVERGE SV8100
2 - 162 Call Forwarding with Follow Me
Related Features
Do Not Disturb
Programmable Function Keys
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
11-11-07 Service Code Setup (for Setup/
Entry Operation) – Call
Forwarding – Follow Me
Assign the service code of Call
Forward Follow Me.
MLT, SLT
(default = 746)
3
15-07-01 Programmable Function Keys Use to assign functions to multiline
terminal line keys.
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
(15 = Call Forward with
Follow Me)
00 ~
99
(Appearance Function
Code) (Service Code
752 by default)
3
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) to
extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
3
20-11-05 Class of Service Options (Hold/
Transfer Service) – Call
Forwarding with Follow Me
In an extension's Class of Service,
turns On (1) or Off (0) an extensions
ability to set Call Forward with
Follow Me.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
To Next Page
Loading...
