Issue 1.0 UNIVERGE SV8100
2 - 178 Call Forwarding, Off-Premise
Department Group Line Forwarding
Method 1
Set the Destination and Forward the Line:
1. Lift the handset.
2. Dial 604.
3. Dial the Department Group number (01~64) to be defined.
4. Select the time mode (1~8) to be defined.
5. Enter the telephone number, which is the destination of the forwarded trunk.
The number is stored in the Speed Dial bin number assigned in Program 24-04-01. This entry overwrites any
existing number defined in the bin.
6. Press Hold to accept the entry.
7. Repeat from Step 3 to define another time mode entry or press Speaker to hang up.
Cancel the Line Forwarding:
1. Lift the handset.
2. Dial 604.
3. Dial the Department Group number (01~64) to be defined.
4. Select the time mode (1~8) to be defined.
5. Press the Exit key.
6. Press Speaker to hang up.
Method 2 (follows the pre-defined destination in Program 24-05-01)
Set Automatic Trunk Forwarding:
The Speed Dial bin must be defined in Program 13-04-01 for the line to forward.
1. Lift the handset.
2. Dial 602.
3. Dial the Department Group number (01~64) to be defined.
4. Press Speaker to hang up.
Cancel Automatic Trunk Forwarding:
1. Lift the handset.
2. Dial 603.
3. Dial the Department Group number (01~64) to be defined.
4. Press Speaker to hang up.
To Next Page
Loading...
