Issue 1.0 UNIVERGE SV8100
2 - 240 Class of Service
System Availability
Terminals
All Stations
Required Component(s)
None
Related Features
Night Service
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
11-11-24 Service Code Setup (for Setup/
Entry Operation) – Change
Station Class of Service
If required, use this option to
change the Service Code a user
dials to change an extension Class
of Service.
MLT
(default = 677)
3
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) to
extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
3
To Next Page
Loading...
