NEC Univerge SV8100 - Page 284

Issue 1.0 UNIVERGE SV8100
2 - 260 Clock/Calendar Display
Operation
The date must be set in system programming (10-01).
To set the system Time:
1. Press Speaker.
2. Dial 728.
3. Dial two digits for the hour (24 hour clock, 13 = 1:00 PM).
4. Dial two digits for the minutes (00~59).
5. Press Speaker to hang up.
20-02-07 System Options for Multiline
Telephones – Time and Date
Display Mode
Select the display mode (type 1~8)
for Time and Date (i.e., time and
date format).
1~8
Type 1 = (12 hour) 10
MAR TUE 3:15PM
Type 2 = (12 hour)
3:15PM MAR 10 TUE
Type 3 = (12 hour) 3-10
TUE 3:15 PM
Type 4 = (12 hour)
3:15PM TUE 10 MAR
Type 5 = (24 hour) 10
MAR TUE 15:15
Type 6 = (24 hour)
15:15 MAR 10 TUE
Type 7 = (24 hour) 3-10
TUE 15:15
Type 8 = (24 hour)
15:15 TUE 10 MAR
(default = 4)
3
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) to
extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
3
20-07-03 Class of Service Options
(Administrator Level) – Time
Setting
Turns Off or On an extension ability
to set the Time via Service Code
728.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3