Issue 1.0 UNIVERGE SV8100
2 - 288 Conference
Define the outgoing call options for each trunk and user.
Set up a Conference with a co-worker in your immediate work area.
DISA and Tie Line users may use the Barge-In feature on a Conference call if they know the
service code and are permitted in their DISA/Tie Line Class of Service.
Meet Me Conference lets an extension user set up a Conference via Paging.
Meet Me Paging lets an extension user set up a two-party meeting via Paging.
A user can set up an Unsupervised Trunk-to-Trunk Conference and then drop out of the call,
allowing the remaining parties to continue the conversation. Establish two trunk calls, press
Hold and dial
#8.
You can optionally program Conf (Transfer) for Transfer. In this case, the Multiline Terminal
must have a Conference function key. The system also allows a call to be transferred into a
Conference call.
When the Conference Originator hangs up with a conference on Hold, or when trying to add
another caller, all internal calls are dropped.
Conferencing when talking on a Virtual Extension:
While talking on a Virtual Extension, if the station has an internal call on Hold, a
conference call cannot be established.
While talking on a Virtual Extension, if the station receives an intercom call (call to its
actual station number), a conference call cannot be established.
While talking on a Virtual Extension, if the station has a call on Hold, a conference call
cannot be established.
Default Setting
Enabled
System Availability
Terminals
Multiline and Single Line Terminals
Required Component(s)
None
To Next Page
Loading...
