NEC Univerge SV8100 - Page 321

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 297
Operation
To join a Voice Call Conference (if invited):
1. After Conference request, press indicated line key.
 A Conf indication is displayed on both telephones.
 A trunk with privacy release or Voice Call Conference blinks.
To exit a Voice Call Conference without affecting the other parties:
1. Press Speaker to hang up.
To toggle between Private and Non-Private mode:
1. Press the Meet-Me Conference key (Program 15-07-01, SC 751: 32).
- OR -
Press the Trunk Line Key. (This toggles from Non-Private to Private. To go back to
Non-Private, the Meet-Me Conference Key above must be pressed.)
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) to
extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
3
20-13-09 Class of Service Options
(Supplementary Service) –
Privacy Release
Turns Off or On an extension ability
to initiate a Voice Call Conference.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-13-17 Class of Service Options
(Supplementary Service) –
Barge-In Tone/Display (Intrusion
Tone)
In an extension Class of Service,
turns On (1) or Off (0) the Barge-In
(Intrusion) Tone. If disabled, this
also turns off the Barge-In display at
the called extension.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
31-01-04 System Options for Internal/
External Paging – Privacy
Release Time
Set the interval users have to join a
Voice Call Conference after it is
announced. (Note that this interval
is also used for Meet Me
Conference.)
0~64800 (seconds)
(default = 90 seconds)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3