NEC Univerge SV8100 - Page 342

Issue 1.0 UNIVERGE SV8100
2 - 318 Cordless DECT Terminals (US Only)
Operation
To set up and program the Cordless DECT Terminals (DTL-8R-1( )):
1. Press and hold down
 and #, then press TALK. The F1 LED flashes red and F1=LK01 is displayed
on the LCD.
2. Press Ring/Vol repeatedly to scroll through the line key (LK) and feature options for function key F1.
20-13-41 Class of Service Options
(Supplementary Service) – Voice
Mail Message Indication on DSS
Turns Off (0) or On (1) the Voice Mail
Message Indication for an extension on
a DSS console.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-13-42 Class of Service Options
(Supplementary Service) –
Extension Data Swap Enabling
Turns Off or On an extension user ability
to use the Station Relocation feature.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-13-44 Class of Service Options
(Supplementary Service) – Live
Monitor Enabling
Turns Off or On an extension user ability
to use Live Monitor.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-13-45 Class of Service Options
(Supplementary Service) – MIC
Key Mode While Call Monitoring
Set per class of service, when in Call
Monitoring Mode determines if the
monitored parties receives the barge in
alert tone when Coaching Mode is
enabled.
0 = Enable
1 = Disable
(default = 1 for
COS 1~15)
3
20-13-47 Class of Service Options
(Supplementary Service) –
Station Number Display
Determine if a station Number is
displayed (On) or not displayed (Off) in
the LCD when the phone is idle.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-13-48 Class of Service Options
(Supplementary Service) –
Station Name Display
Determine if a station Name will be
displayed (On) or not displayed (Off) in
the LCD when the phone is idle.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-13-49 Class of Service Options
(Supplementary Service) – BLF
Indication on CO Incoming State
Determine if a BLF of the station will
light when a Normal CO call is ringing
the phone.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-13-50 Class of Service Options
(Supplementary Service) – AIC
Agent Display which Call is From
Determine if the station logged in via
AIC codes shows which queue the call
is coming from.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-13-51 Class of Service Options
(Supplementary Service) –
Number and Name Appear in the
Directory
Determine if an extension name and
number are listed (On) or unlisted (Off)
in the directory.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3