Issue 1.0 UNIVERGE SV8100
2 - 324 Cordless Telephone Connection
10-03-05 ETU Setup (DLC PKG Setup) –
Optional Installed Unit 2
Use to setup and confirm the Basic
Configuration data for optional
installed Unit 2.
0 = None
1 = APR Module
2 = APA Module
3 = ADA Module
4 = CTA/CTU Module
(default = 0)
3
10-03-06 ETU Setup (DLC PKG Setup) –
Terminal Type (B2)
Use to setup and confirm the Basic
Configuration data for terminal type.
0 = Not set
6 = PGD(2)-U( ) ADP
(Paging)
7 = PGD(2)-U( ) ADP
(Tone Ringer)
8 = PGD(2)-U( ) ADP
(Door Box)
9 = PGD(2)-U( ) ADP
(ACI)
12 = APR (B2 Mode)
(default = 0)
3
10-03-07 ETU Setup (DLC PKG Setup) –
Logical Port Number (B2)
Use to setup and confirm the Basic
Configuration data for logical port
number (B2).
0 = Not Set
6 = PGD(2)-U( ) ADP
(Ext. Speaker)
7 = PGD(2)-U( ) ADP
(Paging/Tone Ringer =
1~8)
8 = PGD(2)-U( ) ADP
(for Door Box = 1~8)
(ACI) = (1~96)
9 = PGD(2)-U( ) ADP
12 = APR (for B2
Mode) (193~512)
(default = 0)
3
10-03-08 ETU Setup (BRIA PKG Setup) –
Dial Sending Mode
Setup and confirm the Basic
Configuration data for each
CD-2BRIA. Select either enblock or
overlap sending.
0 = Enblock Sending
1 = Overlap Sending
(default = 1)
3
10-03-09 ETU Setup (BRIA PKG Setup) –
Dial Information Element
Setup and confirm the Basic
Configuration data for each
CD-2BRIA. If Overlap Sending is
selected in Program 10-03-08,
select either Keypad Facility (0) or
Called Party Number (1) for the dial
information element.
0 = Keypad Facility
1 = Called Party
Number
(default = 0)
3
10-03-10 ETU Setup – Telephone Option
Information
Shows optional adapter
information.
0 = No option
1 = APR
2 = ADA
3 = BHA
(default = 0)
3
10-03-11 System Configuration Setup –
Telephone Option Information
Shows optional adapter
information.
0 = No option
1 = PSA/PSD
2 = Bluetooth Cordless
Handset
(default = 0)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
To Next Page
Loading...
