NEC Univerge SV8100 - Page 355

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 331
20-11-18 Class of Service Options (Hold/
Transfer Service) – No Recall
Allow (0) or Deny (1) answered
Transferred calls from recalling the
originating extension
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-11-19 Class of Service Options (Hold/
Transfer Service) – Hold/
Extended Park
Determine whether an extension
Class of Service should allow
normal or extended Park
(0 = Normal for Program 24-01-06,
1 = Extended for Program
24-01-07).
0 = Off
1 = On
(default = 0 for COS
1~15)
3
20-11-20 Class of Service Options (Hold/
Transfer Service) – No Callback
Turns Off or On an extension ability
to receive Callbacks.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-11-21 Class of Service Options (Hold/
Transfer Service) – Restriction
for Tandem Trunking on Hang Up
Allow (0) or Deny (1) an extension
users ability to set up a tandem/
conference call automatically when
they hang up.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-11-23 Class of Service Options (Hold/
Transfer Service) – CAR/VE Call
Forward Set/Cancel
In an extension Class of Service,
turns On (1) or Off (0) the user
ability to set and cancel Call
Forwarding for a CAR or Virtual
Extension.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-11-24 Class of Service Options (Hold/
Transfer Service) – Trunk Park
Hold Mode
Set the hold type when a trunk call
is put on hold by an extension user.
0 = Non Exclusive Hold
(Off)
1 = Exclusive Hold
(On)
(default = 1 for
COS 1~15)
3
20-11-25 Class of Service Options (Hold/
Transfer Service) – Transfer Park
Call
Turns On or off an extensions ability
to transfer a parked call.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-12-03 Class of Service Options
(Charging Cost Service) – Cost
Display (TTU)
ISDN billing information 0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-13-01 Class of Service Options
(Supplementary Service) – Long
Conversation Alarm
Turns Off (0) or On (1) the Warning
Tone for Long Conversation (not for
single line telephones).
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-13-02 Class of Service Options
(Supplementary Service) – Long
Conversation Cutoff (Incoming)
Turns Off or On an extension user
ability to use Long Conversation
Cutoff for incoming calls.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-13-03 Class of Service Options
(Supplementary Service) – Long
Conversation Cutoff (Outgoing)
Turns Off or On an extension user
ability to use Long Conversation
Cutoff for outgoing calls.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3