NEC Univerge SV8100 - Page 357

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 333
20-13-17 Class of Service Options
(Supplementary Service) –
Barge-In Tone/Display (Intrusion
Tone)
In an extension Class of Service,
turns On (1) or Off (0) the Barge-In
(Intrusion) Tone. If disabled, this
also turns off the Barge-In display at
the called extension.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-13-20 Class of Service Options
(Supplementary Service) –
Account Code/Toll Restriction
Operator Alert (Restricted
Operation Transfer)
Turns Off or On operator alert when
an extension improperly enters an
Account Code or violates Toll
Restriction.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-13-21 Class of Service Options
(Supplementary Service) –
Extension Name
Turns Off (0) or On (1) an extension
user ability to program the name.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-13-22 Class of Service Options
(Supplementary Service) – Busy
Status Display (Called Party
Status)
Turns Off or On the ability to display
the detail state of called party.
 This applies only to the
multiline terminal.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-13-23 Class of Service Options
(Supplementary Service) –
Display the Reason for Transfer
Select whether an extension should
display the reason a call is being
transferred to their extension (Call
Forward Busy, Call Forward No
Answer, DND).
 This only applies to the
multiline terminal.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-13-24 Class of Service Options
(Supplementary Service) –
Privacy Release by Pressing
Line Key
Turns Off or On a user ability to
press a line key to barge into an
outside call. The Barge-In feature
must be enabled if this option is to
be used.
 This applies only to the
multiline terminal.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-13-26 Class of Service Options
(Supplementary Service) –
Group Listen
Turns Off or On an extension ability
to use Group Listen.
 This applies only to the
multiline terminal.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-13-27 Class of Service Options
(Supplementary Service) – Busy
on Seizing Virtual Extension
If set to 1, a busy extension can be
called, while someone is talking on
a virtual extension key. Program
20-13-06 (Call Waiting) must be set
to off for this option to work.
1 = On
0 = Off
(default = 1 for COS
01~15)
3
20-13-28 Class of Service Options
(Supplementary Service) – Allow
Class of Service to be Changed
Turns Off or On the ability of an
extension COS to be changed via
Service Code 677.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-13-29 Class of Service Options
(Supplementary Service) –
Paging Display
Turns Off (0) or On (1) an extension
user ability to display paging
information.
 This applies only to the
multiline terminal..
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3