NEC Univerge SV8100 - Page 359

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 335
Operation
To make a call using a cordless single line telephone:
1. Go off-hook.
2. Dial the station number or dial the Trunk Access Code and telephone number.
To answer a call using a cordless single line telephone:
When the Multiline Terminal is ringing, the incoming call can be answered by the cordless single line
telephone user by going off-hook, when ringing line preference is assigned for the multiline terminal.
To transfer a call from a cordless single line telephone to its associated multiline terminal:
1. The multiline terminal user goes off-hook.
2. The single line telephone user goes on-hook (at this time, the call is automatically connected to the
multiline terminal).
To transfer a call from a multiline terminal to its associated cordless single line telephone:
1. The single line telephone user goes off-hook (at this time, the call is automatically connected to the
single line telephone).
2. The multiline terminal user goes on-hook.
To use Hookflash:
Refer to the operation for Single Line Telephone Access.
20-13-49 Class of Service Options
(Supplementary Service) – BLF
Indication on CO Incoming State
Determine if a BLF of the station
lights when a Normal CO call is
ringing the phone.
 This applies only to the
multiline terminal.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-13-50 Class of Service Options
(Supplementary Service) –
Number and Name appear in the
directory
Determine if the station logged in
via AIC codes shows which queue
the call is coming from.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-13-51 Class of Service Options
(Supplementary Service) –
Number and Name appear in the
directory
Determine if an extension name
and number are listed (On) or
unlisted (Off) in the directory.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3