NEC Univerge SV8100 - Page 362

Issue 1.0 UNIVERGE SV8100
2 - 338 Data Line Security
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
 Level 1 – these are the most commonly assigned programs for this feature.
 Level 2 – these are the next most commonly assigned programs for this feature.
 Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Operation
None
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
20-09-05 Class of Service Options
(Incoming Call Service) – Signal/
Voice Call
Turns Off or On an extension
ability to enable Handsfree
Answerback or Forced Intercom
Ringing for their incoming Intercom
calls.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-09-06 Class of Service Options
(Incoming Call Service) –
Incoming Time Display
If this option is set to 1, the
Incoming Call Time is displayed on
the multiline terminal LCD while
the telephone is ringing.
0 = Off
1 = On
(default = 0 for COS
01~15)
3
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
Turns Off or On an extension
ability to have calls queued if a call
rings the extension when it is busy.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-13-05 Class of Service Options
(Supplementary Service) –
Intercom Off-Hook Signaling
Turns Off or On an extension
ability to receive Off-Hook signals.
 20-09-07 must be set to 0
also for this to be effective.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
Allows a busy extension ability to
Manually (0) or Automatically (1)
receive Off-Hook signals.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-13-35 Class of Service Options
(Supplementary Service) – Block
Camp-On
Use this option to Turns Off or On
extension ability to block callers
from dialing
# to camp-on.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3