NEC Univerge SV8100 - Page 365

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 341
15-09-01 Virtual Extension Ring
Assignment
Individually program an extension
Virtual Extension key(s) to either
ring (1) or not ring (0).
Mode 1:
0 = Not Ring
1 = Ring
(default = 0)
3
15-11-01 Virtual Extension Delayed Ring
Assignment
Use to assign the delayed ringing
options for an extension Virtual
Extension or Virtual Extension
Group Answer keys (defined in
Program 15-09).
KY01 Mode 1:
0 = (No) Immediate
Ring
1 = (Yes) Delay Ring
(default = 0)
3
20-04-03 System Options for Virtual
Extensions – CAR/SIE/Virtual
Extension Delay Interval
CAR Keys/SIE Keys/Virtual
Extensions set for Delayed Ringing
(see Program 15-11) ring the
extension after this interval.
0~64800 (seconds)
(default = 10 seconds)
3
22-01-04 System Options for Incoming
Calls – DIL No Answer Recall
Time
A DIL that rings its programmed
destination longer than this interval
diverts to the DIL No Answer Ring
Group (set in Program 22-08).
0~64800 (seconds)
(default = 0 seconds)
3
22-02-01 Incoming Call Trunk Setup Use this option to set the feature
type for the trunk you are
programming.
Trunks 1~200
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
3
22-08-01 DIL/IRG No Answer Destination If an incoming trunk call rings
longer than the DIL No Answer
Time (Program 22-01-04), it routes
to the destination you specify in
this option. Determine if the
destination should be a Ring
Group, In-Skin/External Voice Mail,
or Central Voice Mail.
0 (No Setting)
001~100
(Incoming Ring Group)
102 (In-Skin/
External Voice Mail
or VM8000 InMail)
(default = 1)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3