UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 19
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
14-01-11 Basic Trunk Data Setup – Account
Code Required
Enable (1) or Disable (0) Account
Codes for each trunk.
0= Disable
1= Enable
(default = 1)
3
15-07-01 Programmable Function Keys Assign a function key as an Account
Code key (code 50). Use this key
instead of the dial pad to enter the
before and after the Account Code.
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~
99 (Appearance
Function Code) (Service
Code 752 by default)
3
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) to
an extension.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
3
21-01-04 System Options for Outgoing
Calls – Dial Tone Detection Time
Adjust the interval the system waits
for the Telco to return Dial Tone.
0~64800 (seconds)
(default = 5 seconds)
3
35-05-01 Account Code Setup – Account
Code Mode
Use this option to select the
Account Code Mode.
0 = Account Codes
disabled (None)
1 = Account Codes
optional
2 = Account Codes
required but not verified
(No verify)
3 = Account Codes
required and verified
(Verify)
(default = 0)
3
35-05-02 Account Code Setup – Forced
Account Code Toll Call Setup
Enable Account Codes for all calls
or just toll calls (for mode 2 or 3 in
Program 35-05-01).
0 = Account Codes for
toll and local calls (All)
1 = Account Codes just
for toll calls (STD)
(default = 0)
3
35-05-03 Account Code Setup – Account
Codes for Incoming Calls
For each Class of Service (1~15),
enter 1 in this option to Enable
Account Codes for incoming calls.
Enter 0 to Disable Account Codes
for incoming calls. If disabled, any
codes you enter dial out on the
connected trunk.
0 = Account Codes for
incoming calls disabled
(No)
1 = Account codes for
incoming calls (Yes)
(default = 0)
3
35-05-04 Account Code Setup – Hiding
Account Codes
For each Class of Service (1~15),
enter 1 to have the system hide
Account Codes on an extension
display as they are entered. Enter 0
to have the Account Codes
displayed.
0 = Display Account
Codes
1 = Hide Account Codes
(default = 0)
3
To Next Page
Loading...
