NEC Univerge SV8100 - Page 435

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 411
 When a multiline terminal user is on a call, they can transfer to another station by pressing a
DSS key for that station. It is not necessary to press Transfer to transfer to another station
using a DSS key.
 When a multiline terminal user is on a call, they must press Transfer to transfer a call off site with a DSS
key.
 Pauses can be entered in the dial string of a DSS/One Touch button. The pause is entered
as P in the dial string and causes the system to wait three seconds before sending the rest of
the digits that follow the P (pause). Multiple pauses can be entered.
 The @ can be entered in the dial string of a DSS/One Touch button. The @ only applies to
ISDN and Intercom calls. When using the @, the system waits for the destination to answer
(answer supervision), and then sends the rest of the digits.
 Entering a P (pause) in a DSS/One Touch dial string can be used for CO calls, Intercom
calls, or after the @ for ISDN calls.
Default Setting
 No DSS Consoles assigned (in Program 30-02-01).
 All DSS Console key ranges are ports 1~200.
 Once a DSS Console is enabled, the console keys are DSS keys (Program 30-03-01).
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
Automatic Call Distribution (ACD)
Call Forwarding
Central Office Calls, Answering
Central Office Calls, Placing
Door Box