NEC Univerge SV8100 - Page 443

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 419
Operation
To use Directed Call Pickup to intercept a call to a co-worker’s extension:
1. Pick up the handset or press Speaker.
2. Dial
 .
3. Dial number of extension whose call you want to intercept.
 If more than one call is coming in, the system sets the priority for which call it answers first.
11-12-28 Service Code Setup (for Service
Access) – Call Pickup for
Another Group
Use to customize the Service
Codes for call pickup for another
group.
MLT, SLT
(default = 769)
3
11-12-29 Service Code Setup (for Service
Access) – Direct Extension Call
Pickup
Use to customize the Service
Codes for direct extension call
pickup.
MLT, SLT
(default =  )
3
11-12-30 Service Code Setup (for Service
Access) – Specified Trunk
Answer
Use to customize the Service
Codes for specified trunk answer.
MLT, SLT
(default = 672)
3
20-06-01 Class of Service for Extensions Assign a Class of Service to
extensions (1~15).
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
3
20-10-05 Class of Service Options
(Answer Service) – Directed Call
Pickup for Own Group
Turns Off or On Directed Call
Pickup for calls ringing an extension
Pickup Group (Service Code 756).
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3