UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 21
3. Dial your Account Code (1~16 digits, using 0~9 and #).
If you make an incorrect entry, your system may automatically alert the operator. If Account Codes are hidden,
each digit you dial shows
on the telephone display.
4. Dial .
- OR -
Press your Account Code key (Program 15-07 or SC 751: code 50).
5. Dial the number you want to call.
To enter an Account Code for an incoming call:
This procedure is not available for single line telephones.
1. Answer incoming call.
If Account Codes for Incoming Calls is disabled, the following steps dial digits out to the connected trunk.
2. Dial .
3. Enter the Account Code.
You can enter any code of the proper length. Incoming Account Codes cannot be Forced or Verified.
4. Dial .
To enter an Account Code at a single line telephone:
1. Access trunk for outside call.
You can access a trunk by dialing a code. Refer to Central Office Calls, Placing for more information.
2. Dial .
3. Enter Account Code (1~16 digits).
4. Dial
.
5. Dial number you want to call.
To Next Page
Loading...
