NEC Univerge SV8100 - Page 476

Issue 1.0 UNIVERGE SV8100
2 - 452 D
term
Cordless II Terminal
10-03-06 ETU Setup (DLC PKG Setup) –
Terminal Type (B2)
Use to setup and confirm the Basic
Configuration data for terminal type.
0 = Not set
6 = PGD(2)-U( ) ADP
(Paging)
7 = PGD(2)-U( ) ADP
(Tone Ringer)
8 = PGD(2)-U( ) ADP
(Door Box)
9 = PGD(2)-U( ) ADP
(ACI)
12 = APR (B2 Mode)
(default = 0)
3
10-03-07 ETU Setup (DLC PKG Setup) –
Logical Port Number (B2)
Use to setup and confirm the Basic
Configuration data for logical port
number (B2).
0 = Not Set
6 = PGD(2)-U( ) ADP
(Ext. Speaker)
7 = PGD(2)-U( ) ADP
(Paging/Tone Ringer =
1~8)
8 = PGD(2)-U( ) ADP
(for Door Box = 1~8)
(ACI) = (1~96)
9 = PGD(2)-U( ) ADP
12 = APR (for B2 Mode)
(193~512)
(default = 0)
3
15-07-01 Programmable Function Keys Assign a Department Calling key (46)
so extension users can install or
remove themselves from the
Department Calling Group. Additional
keys can also be assigned for
Department Group features
immediate calling destination (58),
delayed calling destination (59) and
DND destination (60).
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

00 ~

99 (Appearance
Function Code) (Service
Code 752 by default)
3
20-07-01 Class of Service Options
(Administrator Level) – Manual
Night Service Enabled
Turns Off or On an extension for
manually Switching the Night Mode
(Service Code 718). This option must
be enabled for an extension to display
the Night indication.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
3
20-07-03 Class of Service Options
(Administrator Level) – Time
Setting
Turns Off or On an extension user
ability to set the Time via Service
Code 728.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-07-05 Class of Service Options
(Administrator Level) – Set/
Cancel Automatic Trunk-to-Trunk
Transfer
Turns Off or On an extension user
ability user ability to use the
Trunk-to-Trunk Forwarding service
codes.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-07-11 Class of Service Options
(Administrator Level) – Forced
Trunk Disconnect (analog trunk
only)
Turns Off or On an extension user
ability to use Forced Trunk
Disconnect. This allows the extension
to disconnect an Unsupervised
Conference in progress.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3