NEC Univerge SV8100 - Page 514

Issue 1.0 UNIVERGE SV8100
2 - 490 D
term
series i Multiline Terminals
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
 Level 1 – these are the most commonly assigned programs for this feature.
 Level 2 – these are the next most commonly assigned programs for this feature.
 Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.

The items highlighted in gray are read only and cannot be changed.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
10-03-01 ETU Setup (DLC PKG Setup) –
Terminal Type (B1)
Use to setup and confirm the Basic
Configuration data for terminal type
(B1).
0 = Not set
1 = Multiline Terminal
2 = SLT Adapter
3 = Bluetooth Cordless
Handset
6 = PGD (Paging)
7 = PGD (Tone Ringer)
8 = PGD (Doorbox)
9 = PGD (ACI)
10 = DSS Console
11 = -- Not Used --
(default = 0)
3
10-03-02 ETU Setup (DLC PKG Setup) –
Logical Port Number (B1)
Use to setup and confirm the Basic
Configuration data for logical port
number (B1).
0 = Not set
1 = Multiline Terminal
(1~256)
2 = SLT Adapter
(1~256)
6 = PGD(2)-U( ) ADP
(Paging) (1~8)
7 = PGD(2)-U( ) ADP
(for Tone Ringer) (1~8)
8 = PGD(2)-U( ) ADP
(for Door Box) (1~8)
9 = PGD(2)-U( ) ADP
(for ACI) (1~96)
10 = DSS (1~32)
11 = -- Not Used --
(default = 0)
3
10-03-04 ETU Setup (DLC PKG Setup) –
Optional Installed Unit 1 (Only
Applies to DTH/DTR telephones)
Use to setup and confirm the Basic
Configuration data for optional
installed Unit 1.
0 = None
1 = APR Module
2 = APA Module
3 = ADA Module
4 = CTA/CTU Module
(default = 0)
3