NEC Univerge SV8100 - Page 523

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 499
20-11-15 Class of Service Options (Hold/
Transfer Service) – VRS
Personal Greeting (Message
Greeting)
Turns Off or On an extension user
ability to dial Service Code 4 7 to
record, listen to or erase the
Personal Greeting Message.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-11-16 Class of Service Options (Hold/
Transfer Service) – Call Redirect
Turns Off or On a multiline terminal
user ability to transfer a call to a
predefined destination (such as an
operator, voice mail, or another
extension) without answering the
call.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-11-17 Class of Service Options (Hold/
Transfer Service) – Department
Group Trunk-to-Trunk Transfer
(Each Telephone Group
Transfer)
Turns Off or On an extension user
ability in a Department Group to use
the Trunk-to-Trunk Forwarding
service codes.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-11-18 Class of Service Options (Hold/
Transfer Service) – No Recall
No Recall set to allow does not stop
Transferred calls from recalling
from a virtual extension
0 = Deny
1 = Allow
(default = 0 for
COS 1~15)
3
20-11-19 Class of Service Options (Hold/
Transfer Service) – Hold/
Extended Park
Determine if an extension Class of
Service should allow normal or
extended Park.
0 = Normal
1 = Extended
(default = 0 for
COS 1~15)
3
20-11-20 Class of Service Options (Hold/
Transfer Service) – No Callback
Turns Off or On an extension ability
to receive Callbacks
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-11-21 Class of Service Options (Hold/
Transfer Service) – Restriction
for Tandem Trunking on Hang
Up
Allow or Deny an extension user
ability to set up a tandem/
conference call automatically when
they hang up.
0 = Allow
1 = Deny
(default = 0 for
COS 1~15)
3
20-11-22 Class of Service Options (Hold/
Transfer Service) – Restrict
Unsupervised Conference
Allow or Deny an extension ability
to initiate a Trunk-to-Trunk Transfer
(Tandem Trunking).
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-11-23 Class of Service Options (Hold/
Transfer Service) – CAR/VE Call
Forward Set/Cancel
In an extension Class of Service,
turns Off or On an extension user
ability to set and cancel Call
Forwarding for a CAR or Virtual
Extension.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-11-24 Class of Service Options (Hold/
Transfer Service) – Trunk Park
Hold Mode
Set the hold type when a trunk call
is put on hold by an extension user.
0 = Non Exclusive Hold
(Off)
1 = Exclusive Hold
(On)
(default = 1 for
COS 1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3