Issue 1.0 UNIVERGE SV8100
2 - 508 Facsimile CO Branch Connection
System Availability
Terminals
None
Required Component(s)
CD-4COTC
Related Features
None
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
14-02-14 Analog Trunk Data Setup – Loop
Start/Ground Start
Select loop start or ground start for
the trunk.
0 = Loop Start (Loop)
1 = Ground Start
(Ground)
(default = 0)
3
14-02-21 FAX Branch Connection Sets CO for Fax Branch
Connection.
If FAX Branch is selected,
Program 14-10 Power Failure
Telephone Setting is NOT
valid.
0 = No
1 = Yes
(default = 0)
3
14-05-01 Trunk Group Assign trunks to trunk groups
(1~100).
Trunk Group Number:
0~100
Priority Number:
1~200
(Default trunks 1~200 =
Priority 1~200)
3
To Next Page
Loading...
