NEC Univerge SV8100 - Page 543

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 519
11-10-05 Service Code Setup (for System
Administrator) – Storing Group
Speed Dialing Numbers
Use for storing group speed dialing
numbers for the System
Administrator.
MLT
(default = 754)
11-10-06 Service Code Setup (for System
Administrator) – Setting the
Automatic Transfer for Each
Trunk Line
Set the service code for setting
automatic transfer for each trunk
line.
MLT
(default = 733)
3
11-10-07 Service Code Setup (for System
Administrator) – Canceling the
Automatic Transfer for Each
Trunk Line
Set the service code for canceling
automatic transfer for each trunk
line.
MLT
(default = 734)
3
11-10-08 Service Code Setup (for System
Administrator) – Setting the
Destination for Automatic Trunk
Transfer
Set the service code for setting the
destination for automatic trunk
transfer.
MLT
(default = 735)
3
11-10-12 Service Code Setup (for System
Administrator) – Night Mode
Switching for Other Group
Use to customize the night mode
switching for other group Service
Codes for the System
Administrator.
MLT
(default = 618)
3
11-10-16 Service Code Setup (for System
Administrator) – Leaving
Message Waiting (Requires CPU
to be licensed for Hotel/Motel)
Use to customize the leave
message waiting Service Codes
for the System Administrator
(requires CPU to be licensed for
Hotel/Motel).
MLT
(default = 626)
3
11-10-17 Service Code Setup (for System
Administrator) – Dial Block by
Supervisor
Use to customize the supervisor
dial block Service Codes for the
System Administrator.
MLT
(default = 601)
3
11-10-18 Service Code Setup (for System
Administrator) – Off-Premise Call
Forward by Door Box
Use to customize the night mode
switching Service Codes for the
System Administrator.
MLT
(default = 722)
3
11-10-20 Service Code Setup (for System
Administrator) – VRS - Record/
Erase Message
Use to customize the night mode
switching Service Codes for the
System Administrator.
MLT, SLT
(default = 616)
3
11-10-21 Service Code Setup (for System
Administrator) – VRS - General
Message Playback
Use to customize the VRS general
message playback for the System
Administrator.
MLT, SLT
(default = 611)
3
11-10-22 Service Code Setup (for System
Administrator) – VRS - Record or
Erase General Message
Use to customize the VRS record
or erase general message for the
System Administrator.
MLT, SLT
(default = 612)
3
11-10-23 Service Code Setup (for System
Administrator) – SMDR -
Extension Accumulated Printout
Code
Use to customize the SMDR
extension accumulated printout
codes for the System
Administrator.
MLT
(default = 621)
3
11-10-24 Service Code Setup (for System
Administrator) – SMDR - Group
Accumulated Printout Code
Use to customize the SMDR group
accumulated printouts for the
System Administrator.
MLT
(default = 622)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3