NEC Univerge SV8100 - Page 545

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 521
11-11-05 Service Code Setup (for Setup/
Entry Operation) – Call Forward –
Both Ring
Set the service code for setting call
forwarding for busy or no answer.
MLT, SLT
(default = 745)
3
11-11-07 Service Code Setup (for Setup/
Entry Operation) – Call
Forwarding – Follow Me
Set the service code for setting call
forwarding for follow me.
MLT, SLT
(default = 746)
3
11-11-08 Service Code Setup (for Setup/
Entry Operation) – Do Not
Disturb
Set the service code for setting call
forwarding for Do Not Disturb.
MLT, SLT
(default = 747)
3
11-11-09 Service Code Setup (for Setup/
Entry Operation) – Answer
Message Waiting
Use to customize the answer
message waiting used for
registration and setup.
MLT, SLT
(default = 0)
3
11-11-10 Service Code Setup (for Setup/
Entry Operation) – Cancel All
Messages Waiting
Use to cancel all messages waiting
used for registration and setup.
MLT, SLT
(default = 773)
3
11-11-11 Service Code Setup (for Setup/
Entry Operation) – Cancel
Message Waiting
Use to cancel message waiting
used for registration and setup.
MLT, SLT
(default = 771)
3
11-11-12 Service Code Setup (for Setup/
Entry Operation) – Alarm Clock
Use to customize the alarm clock
used for registration and setup.
MLT, SLT
(default = 727)
3
11-11-13 Service Code Setup (for Setup/
Entry Operation) – Display
Language Selection for multiline
terminal
Use to customize the display
language for multiline terminal
used for registration and setup.
MLT
(default = 678)
3
11-11-14 Service Code Setup (for Setup/
Entry Operation) – Text Message
Setting
Use to customize the text message
setting used for registration and
setup.
MLT
(default not assigned)
3
11-11-15 Service Code Setup (for Setup/
Entry Operation) – Enable
Handsfree Incoming Intercom
Calls
Use to customize the enable
handsfree incoming intercom calls
used for registration and setup.
MLT
(default = 721)
3
11-11-16 Service Code Setup (for Setup/
Entry Operation) – Force Ringing
of Incoming Intercom Calls
Use to customize the force ringing
of incoming intercom calls used for
registration and setup.
MLT
(default = 723)
3
11-11-17 Service Code Setup (for Setup/
Entry Operation) –
Programmable Function Key
Programming (2-Digit Service
Codes)
Use this option to set the service
code (default 751) to assign 2-digit
function codes to the Function
keys.
MLT
(default = 751)
3
11-11-18 Service Code Setup (for Setup/
Entry Operation) – BGM On/Off
Use to customize the BGM On/Off
used for registration and setup.
MLT
(default = 725)
3
11-11-19 Service Code Setup (for Setup/
Entry Operation) – Key Touch
Tone On/Off
Use to customize the key touch
tone Off/On used for registration
and setup.
MLT
(default = 724)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3