NEC Univerge SV8100 - Page 589

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 565
Operation
To enable Handsfree Answerback for your incoming Intercom calls:
1. Press idle Speaker.
2. Dial 721.
3. Press Speaker to hang up.
 This disables Forced Intercom Ringing.
To enable Forced Intercom Ringing for your incoming Intercom calls:
1. Press idle Speaker.
2. Dial 723.
3. Press Speaker to hang up.
 This disables Handsfree Answerback.
To change the way your Intercom call signals the extension you are calling:
1. Dial 1.
 If ringing, your call voice-announces. If voice-announced, your call starts to ring the destination. This option is
also available at single line telephones.
20-08-10
Class of Service Options
(Outgoing Call Service) – Signal/
Voice Call
In an extension Class of Service,
enable (1) or disable (0) an
extension ability to toggle between
Handsfree Answerback and Forced
Intercom Ringing for outgoing
Intercom calls (dial 1 or Service
Code 712).
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-09-05
Class of Service Options
(Incoming Call Service) – Signal/
Voice Call
Turns Off or On an extension ability
to enable Handsfree Answerback or
Forced Intercom Ringing for their
incoming Intercom calls.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3