NEC Univerge SV8100 - Page 624

Issue 1.0 UNIVERGE SV8100
2 - 600 Hotline
Operation
To program a Hotline key:
1. Press the Speaker key.
2. Dial service code 751.
3. Press the unassigned key you want to program.
4. DIal 01 (DSS/One-touch)
5. Dial partners extension number.
6. Press Hold.
To place a call to your Hotline partner:
1. Press the Hotline key (Program 15-07 or SC 751: 01 + partner’s extension number).
 You can optionally lift the handset after this step for privacy.
To transfer your outside call to your Hotline partner:
1. Press the Hotline key.
2. Announce the call and hang up.
- OR -
Hang up to have the call wait at your Hotline partner unannounced.
 If unanswered, the call recalls like a regular transferred call.
To answer a call from your Hotline partner:
1. If you hear two beeps, speak toward the telephone.
- OR -
If your telephone rings, lift the handset.