UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 629
The following menu items require programming in your SIP IP Phone (consult SIP Phone vendor specific
documentation):
Program/
Item No.
Description/Selection Default Assigned Data Comments
1 IP Address 0.0.0.0 Enter a Static IP Address for the SIP
Phone.
2 Subnet Mask 0.0.0.0 Enter the Subnet Mask Address.
3 Default Gateway 0.0.0.0 Enter the Default Gateway address.
4 IPLA Address 0.0.0.0 Enter the IPLA IP Address.
This information can be located in
PRG 10-12-09 UNIVERGE SV8100
Network Setup IP Address.
5 Extension Number 0 Assign the SIP Phone extension. This
information must match Program
11-02-01 Extension Numbering.
To Next Page
Loading...
