UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 47
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Operation
Depends on the connected ancillary device.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
10-03-03 ETU Setup (LCA PKG Setup) –
Transmit Gain Level (S-Level)
Customize the transmit and receive
levels of the CODEC Gain Types for
500/2500 type single line
telephones.
1~63 (-15.5 +15.5dB)
[default = 32 (0dB)]
3
10-03-04 ETU Setup (LCA PKG Setup) –
Receive Gain Level (R-Level)
Customize the transmit and receive
levels of the CODEC Gain Types for
500/2500 type single line
telephones.
1~63 (-15.5 +15.5dB)
[default = 32 (0dB)]
3
15-03-01 Single Line Telephone Basic Data
Setup – SLT Signaling Type
Use this option to tell the system the
type of dialing the connected
telephone uses.
0 = DP
1 = DTMF
(default = 1)
3
15-03-04 Single Line Telephone Basic Data
Setup – Flashing
Enables/Disables Flash for single
line (500/2500 type) telephones.
0 = No
1 = Yes
(default = 1)
3
To Next Page
Loading...
