Issue 1.0 UNIVERGE SV8100
2 - 700 Long Conversation Cutoff
Related Features
Central Office Calls, Answering
Central Office Calls, Placing
Direct Inward System Access (DISA)
Multiple Trunk Types
Warning Tone for Long Conversation
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
14-01-14 Basic Trunk Data Setup – Long
Conversation Cutoff
Enable (1) or disable (0) a trunk
ability to disconnect incoming and
outgoing central office calls
automatically.
0 = Disable
1 = Enable
(default = 0)
3
14-01-15 Basic Trunk Data Setup – Long
Conversation Alarm Before Cut
Off
Enable (1) or disable (0) the Long
Conversation Alarm for each
trunk.
0 = Disable
1 = Enable
(default = 0)
3
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port =
Class 1
3
20-13-02 Class of Service Options
(Supplementary Service) – Long
Conversation Cutoff (Incoming)
Turns Off (0) or On (1) an
extension ability to use Long
Conversation Cutoff for incoming
calls.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
To Next Page
Loading...
