UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 749
Loop Start/Ground Start Trunks
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
14-01-01 Basic Trunk Data Setup – Trunk
Name
Set the names for trunks. The trunk
name displays on a multiline
terminal for incoming and outgoing
calls.
Up to 12 Characters
Default:
Line 001
Line 002
Line 003
:
Line 200
3
25-07-01 System Timers for VRS/DISA –
VRS/DISA Dial Tone Time
After answering a VRS/DISA trunk,
the system waits this time for the
caller to dial the first digit of the
DISA password. If the caller fails to
dial in this time, the system drops
the call.
0~64800 (seconds)
(default = 10 seconds)
3
34-01-02 E&M Tie Line Basic Setup –
Receive Dial Type for E&M Tie
Line
For DID and tie trunks, use this
option to set the trunk.s signaling
type (Dial Pulse or DTMF).
0 = DP
1 = DTMF
(default = 1)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
14-02-14 Analog Trunk Data Setup – Loop
Start/Ground Start
Indicate if the Analog trunk is Loop
Start or Ground Start.
0 = Loop Start (Loop)
1 = Ground Start
(Ground)
(default = 0)
3
14-04-01 Behind PBX Setup Indicate if the trunk is installed
behind a PBX (1) or not (0). There
is one item for each of the Night
Service Modes.
0 = Stand Alone (Trunk)
1 = Behind PBX (PBX)
2 = Not Used
3 = CTX assume 9
(default = 0)
3
14-05-01 Trunk Group – Trunk Group
Number
Assign trunks to Trunk Groups.
You can also assign the outbound
priority for trunks in the group.
When users dial the trunk group,
they seize the trunks in the order
you specify in the outbound
priority entry.
Trunk Group Number:
0~100 Priority Number:
1~200
(default = Trunk Group 1,
with priority in ascending
order.)
3
22-02-01 Incoming Call Trunk Setup For each Night Service mode,
enter service type for each trunk.
0 = Normal
1 = VRS (second dial
tone if no VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
3
To Next Page
Loading...
