NEC Univerge SV8100 - Page 878

Issue 1.0 UNIVERGE SV8100
2 - 854 Private Line
15-07-01 Programmable Function Keys Make sure extension has a line key
(e.g., 012) for the Private Line.
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

00 ~

99 (Appearance
Function Code) (Service
Code 752 by default)
3
21-02-01 Trunk Group Routing for
Extensions
Change the routing as needed. 1~100 (Trunk Groups)
0~100
(0 = No Setting)
(default = 1)
3
22-02-01 Incoming Call Trunk Setup Set the Trunk Service to Type 4 if
routing unanswered Private Lines
to voice mail or 0 if not routing to
voice mail.
Ring Groups: 1~100
0 = Normal
1 = VRS (second dial tone
if no VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
3
22-04-01 Incoming Extension Ring Group
Assignment
Assign extension to Private Line
ring group. Set the ringing in
Program 22-06 – use option 1 for
Incoming or Both Way Private
Lines. Use option 0 for Outgoing
Private Lines. Do not assign any
other extensions to the Private Line
ring group.
Maximum eight digits
Default:
Extensions 101~108 (first
eight ports) ring for
incoming Ring Group 1
calls. No other
extensions ring for
incoming Ring Group 1
calls.
3
22-05-01 Incoming Trunk Ring Group
Assignment
Assign Private Line to an unused
Private Line ring group (i.e., a ring
group just for the Private Line).
Incoming Group Number
for Day/Night Mode (1~8):
0 (No Setting)
001~100
(Incoming Group)
102 (In-Skin/ External
Voice Mail or VM8000
InMail)
(default = 1)
3
22-07-01 DIL Assignment If routing unanswered Private Lines
to voice mail, assign DILs to the
extensions.
Extension Number
(maximum eight digits)
(default not assigned)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3