NEC Univerge SV8100 - Page 889

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 865
Operation
Refer to the UNIVERGE SV8100 Programming Manual for additional information.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
90-02-01 Programming Password Setup –
User Name
Use to set the system passwords. Maximum 10 characters
User No. 1, Level 1 (MF)
User Name = nec-i,
Password = 374772
User No. 2, Level 2 (IN)
User Name = tech,
Password = 12345678
User No. 3, Level 3 (SA)
User Name = admin1,
Password = 0000
User No. 4, Level 4 (SB)
User Name = admin2,
Password = 9999
3
90-02-02 Programming Password Setup –
Password
Configure the administrator
accounts that are used when
connecting to the KTS via PCPro/
WebPro.
If using PCPro, these are the
accounts that are used to connect.
If using WebPro, these are the
accounts that are used to login.
 If calls are answered by an
Auto attendant first, instead of
the DIL setup on Program 22-
01 and Program 22-07, set the
transfer destination in the Auto
Attendant to the Modem
Access Service Code.
Up to eight digits
Please refer to the
SV8100 Programming
Manual for default
settings.
3
90-02-03 Programming Password Setup –
User Level
Use to set the system password
user levels.
0 = Prohibited User
1 = MF (Manufacturer
Level)
2 = IN (Installer Level)
3 = SA (System
Administrator Level 1)
4 = SB (System
Administrator Level 2)
5 = UA (User
Programming Level 1)
Please refer to the
SV8100 Programming
Manual for default
settings.
3