UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 899
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
11-14-17 Service Code Setup (for Hotel) –
Hotel Room Monitor
Customize the service code (675
by default) to be used for Room
Monitor.
MLT, SLT
(default = 675)
3
15-07-01 Programmable Function Keys Assign a function key as a Room
Monitor key (code 39) for both the
extension being monitored and the
extension initiating Room Monitor.
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~
99 (Appearance
Function Code) (Service
Code 752 by default)
3
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to an extension.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port =
Class 1
3
20-13-11 Class of Service Options
(Supplementary Service) – Room
Monitor, Initiating Extension
Turns Off (0) or On (1) an
extension user ability to Room
Monitor other extensions.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-13-12 Class of Service Options
(Supplementary Service) – Room
Monitor, Extension Being
Monitored
Turns Off (0) or On (1) an
extension ability to be monitored
by other extensions.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
42-03-12 Class of Service Options (Hotel/
Motel) – SLT Room Monitor
Enable (1) or disable (0) a single
line telephone ability to use Room
Monitor.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
To Next Page
Loading...
