NEC Univerge SV8100 - Page 968

Issue 1.0 UNIVERGE SV8100
2 - 944 SLT Adapter
20-07-15 Class of Service Options
(Administrator Level) – VRS
General Message Record/Delete
Turns Off (0) or On (1) an
extension for dialing Service Code
612 and record, listen to, or erase
the General Message.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
3
20-07-18 Class of Service Options
(Administrator Level) – SMDR
Printout Accumulated Extension
Data
Used to define if the Accumulated
Extension Data is included in the
SMDR printout for each COS.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
3
20-07-19 Class of Service Options
(Administrator Level) – SMDR
Printout Department Group (STG)
Data
Used to define if the Department
Group (STG) Data is included in the
SMDR printout for each COS.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
3
20-07-20 Class of Service Options
(Administrator Level) – SMDR
Printout Accumulated Account
Code Data
Used to define if the Accumulated
Account Code Data is included in
the SMDR printout for each COS.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
3
20-07-21 Class of Service Options
(Administrator Level) – Register/
Delete DECT
Turns Off or On an extension ability
to register or unregister an
Wireless DECT (SIP) handset
using the service codes defined in
Program 11-10-30 and Program 11-
10-31.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-07-23 Class of Service Options
(Administrator Level) – CO
Message Waiting Indication
Callback Number Programming
Enable or Disable an extension
ability to receive CO Message
Waiting Indication.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-07-24 Class of Service Options
(Administrator Level) – Set/
Cancel Private Call Refuse
Enable or Disable an extension
ability to set or cancel Private Call
Refuse.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-07-25 Class of Service Options
(Administrator Level) – Set/
Cancel Caller ID Refuse
Enable or Disable an extension
ability to set or cancel Caller ID
Refuse.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-07-26 Class of Service Options
(Administrator Level) – Dial-In
Mode Switch
Enable or Disable an extension
ability to set or cancel dial-in mode
switch.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-07-27 Class of Service Options
(Administrator Level) –
Do-Not-Call Administrator
Enable or Disable an extension
ability to set or cancel do not call
administrator.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-08-01 Class of Service Options
(Outgoing Call Service) –
Intercom Calls
Turns Off or On Intercom calling for
the extension.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3