NEC Univerge SV8100 - Page 973

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 949
20-11-09 Class of Service Options (Hold/
Transfer Service) – Group Hold
Initiate
Turns Off or On an extension ability
to initiate a Group Hold.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-11-10 Class of Service Options (Hold/
Transfer Service) – Group Hold
Answer
Turns Off or On an extension ability
to pick up a call on Group Hold.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-11-11 Class of Service Options (Hold/
Transfer Service) – Automatic On-
Hook Transfer
Turns Off (0) or On (1) an extension
ability to use Automatic On-Hook
Transfer.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-11-12 Class of Service Options (Hold/
Transfer Service) – Call
Forwarding Off-Premise (External
Call Forwarding)
In an extensions Class of Service,
turns On (1) or Off (0) setting up
Call Forwarding Off-Premise at the
extension.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-11-13 Class of Service Options (Hold/
Transfer Service) – Operator
Transfer After Hold Callback
Turns Off or On an extension ability
to have a call which recalls from
hold transfer to the operator.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-11-14 Class of Service Options (Hold/
Transfer Service) –
Trunk-to-Trunk Transfer
Restriction
Turns Off (0) or On (1) the Trunk-to-
Trunk Transfer Restriction. If
enabled, Trunk-to-Trunk Transfer is
not possible.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-11-15 Class of Service Options (Hold/
Transfer Service) – VRS Personal
Greeting (Message Greeting)
Turns Off or On an extension ability
to dial Service Code 4 7 to
record, listen to or erase the
Personal Greeting Message.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-11-16 Class of Service Options (Hold/
Transfer Service) – Call Redirect
Turns On (1) or Off (0) a multiline
terminal user’s ability to transfer a
call to a pre-defined destination
(such as an operator, voice mail, or
another extension) without
answering the call.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-11-17 Class of Service Options (Hold/
Transfer Service) – Department
Group Trunk-to-Trunk Transfer
(Each Telephone Group Transfer)
Turns On (1) or Off (0) the ability of
an extension in a Department
Group to use the Trunk-to-Trunk
Forwarding service codes.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-11-18 Class of Service Options (Hold/
Transfer Service) – No Recall
Allow (0) or Deny (1) answered
Transferred calls from recalling the
originating extension.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-11-19 Class of Service Options (Hold/
Transfer Service) – Hold/
Extended Park
Determine whether an extension
Class of Service should allow
normal or extended Park
(0 = Normal for Program 24-01-06,
1 = Extended for Program
24-01-07).
0 = Off
1 = On
(default = 0 for COS
1~15)
3
20-11-20 Class of Service Options (Hold/
Transfer Service) – No Callback
Turns Off or On an extension ability
to receive Callbacks.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3