NEC Univerge SV8100 - Page 978

Issue 1.0 UNIVERGE SV8100
2 - 954 SLT Adapter
20-13-45 Class of Service Options
(Supplementary Service) – MIC
Key Mode While Call Monitoring
Set per class of service, when in
Call Monitoring Mode determines if
the monitored parties receives the
barge in alert tone when Coaching
Mode is enabled.
0 = Enable
1 = Disable
(default = 1 for
COS 1~15)
3
20-13-47 Class of Service Options
(Supplementary Service) – Station
Number Display
Determine if a station Number will
be displayed (On) or not displayed
(Off) in the LCD when the phone is
in an idle state.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-13-48 Class of Service Options
(Supplementary Service) – Station
Number Display
Determine if a station Name will be
displayed (On) or not displayed
(Off) in the LCD when the phone is
in an idle state.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-13-49 Class of Service Options
(Supplementary Service) – BLF
Indication on CO Incoming State
Determine if a BLF of the station
will light when a Normal CO call is
ringing the phone.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-13-50 Class of Service Options
(Supplementary Service) – AIC
Agent Display Which Call is from
Determine if the station logged in
via AIC codes will show which
queue the call is coming from.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-13-51 Class of Service Options
(Supplementary Service) –
Number and Name Appear in the
Directory
Determine if an extension name
and number will be listed (On) or
unlisted (Off) in the directory.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-14-01 Class of Service Options for
DISA/E&M – First Digit
Absorption (Delete First Digit
Dialed)
For Tie Lines, Enable or Disable
the ability to absorb (ignore) the
first incoming digit. Use this to
make the tie trunk compatible with
3- and 4-digit Tie Line service. This
option does not apply to DISA.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-14-02 Class of Service Options for
DISA/E&M – Trunk Group
Routing/ARS Access
This option Enables or Disables a
DISA or tie trunk caller’s ability to
dial 9 for Trunk Group Routing or
Automatic Route Selection.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-14-03 Class of Service Options for
DISA/E&M – Trunk Group Access
This option Enables or Disables a
DISA or tie trunk caller’s ability to
access trunk groups for outside
calls (Service Code 704).
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-14-04 Class of Service Options for
DISA/E&M – Outgoing System
Speed Dialing
This option Enables or Disables a
DISA or tie trunk caller’s ability to
use the System Speed Dialing.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-14-05 Class of Service Options for
DISA/E&M – Operator Calling
This option Enables or Disables a
DISA or tie trunk caller’s ability to
dial 0 for the telephone system
operator.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-14-06 Class of Service Options for
DISA/E&M – Internal Paging
This option Enables or Disables a
DISA or tie trunk caller’s ability to
use the telephone system Internal
Paging.
0 =Off
1 = On
(default = 1 for
COS 1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3