Chapter 4 Standard Mode
4-67 NWA-033628-001 Rev.1.0
[Tools] Category
Continued on next page
No. Item Description
(1) [New] ( ) button Click to create a new script file.
(2) [Open] ( ) button Click to open (import) a script file.
(3) [Save] ( ) button Click to save (export) the contents of the script shown in the
screen to the current script file.
(4) [Save as...] ( ) button Click to create (export to) a script file from the contents of
the script shown in the screen.
(5) Script File Name field Displays the drive, path and file names of a script file
imported or exported.
(6) Title field Displays and/or edits the title of the script file specified in the
Script File field.
(7) Script Entry
Area
CMD field Displays and/or edits the command code and YY number.
• Input characters: 0 to 9, A through F, a through f (a through
f are converted to uppercase automatically)
• Input length: Up to six characters
FD field Displays and/or edits the first data portion of the command
code.
• Input characters: 0 to 9, A through F, a through f (a through
f are converted to uppercase automatically) and comma (,)
• Input length: Up to 16 characters
SD field Displays and/or edits the second data portion of the com-
mand code.
• Input characters: No limitation
• Input length: Up to 256 characters
ED field Displays command code-specific SV8300 response data.
• Input characters: Other than CCC
• Input length: Up to 24 characters
MESSAGE
field
Displays or edits a command code comment.
• Input characters: Unlimited
• Input length: Up to 256 characters
(8) [Clear] button Click to clear the data shown in the Script Entry Area.
(9) [Read] button Click to read the contents of the script shown in the screen as
system data on the SV8300.
To Next Page
Loading...
