Chapter 4 Standard Mode
4-28 NWA-033628-001 Rev.1.0
[Implement] Category
Registering Additional Blades
To register an additional blade, follow these steps:
STEP1: Select a unit number in Unit No. field.
STEP2: Click [Read] button.
A screen is displayed to notify the completion of the data read process.
Blade information is read from the SV8300 having the unit number specified in the Unit No.
field, and information about the blades mounted in the SV8300 is displayed in the Blade Dis-
play Area of the [Blade Configuration] screen.
STEP3: Click the [OK] button.
No. Item Description
(4) [Read] button Click to read blade information from the SV8300 having its unit number
specified in the Unit No. field.
(5) [Apply] button Click to write edited data to the SV8300.
(6) [Zoom In] button Click to display a preferences screen for the blade selected in the Blade
Display Area.
[OK] button
To Next Page
Loading...
