Chapter 4 Standard Mode
4-82 NWA-033628-001 Rev.1.0
[Maintenance] Category
Saving System Data
You can save the system data registered on the SV8300 to PCPro in these steps:
STEP1: Click [Save] button in the [System Data Save/Load/Verify] screen.
The [Save] screen is displayed in the work window.
STEP2: Select the area of the system data to be saved in the Area Name field.
The number of the selected system data area is displayed in the System Data Area Number
field. If you have chosen to specify an Area Number, enter the Area Number of the system
data in the Area Number field.
Continued on next page
System data area name Area number Remarks Differences
All system data and All service
memory
1,2,3,4,80,81 Yes
All system data (without Speed Dial-
ing)
1 System data only –
All service memory 2 Service memory only Yes
System Speed Dialing 3 CM71,72 –
Station Speed Dialing 4 CM73,74 –
Area Name field
Area Number field
Office Name field
File Name field
[Save] button
[Select Folder] button
[<< Back] button
To Next Page
Loading...
