NEC Univerge SV8300 - Setting of IP Station (CM10;CM12;CM77)

Chapter 4 Standard Mode
4-17 NWA-033628-001 Rev.1.0
[Implement] Category
STEP6: Click the [OK] button.
You are directed back to the [5. Setting of Station] screen.
STEP7: Click the [OK] button.
You are directed back to the [Quick Setup] screen. Checked mark appears to the right of but-
ton [5].
The Station has now been configured.
Setting of IP Station (CM10/CM12/CM77)
Configure the basic settings of the IP Station.
STEP1: Click button [6] in the [Quick Setup] screen.
The [6. Setting of IP Station] screen appears in the work window.
STEP2: Set the items listed in (3).
(2)
(3)
(1)
[OK] button